RS232 Connection |
||
| 1. Connect the RS232 serial cable to the K-Series display (baud rate: 9600) 2. You can control the K-Series display by sending instructions to the serial port |
||
| Event | Value | Command |
| Remote Control | Up | 55 00 00 01 56 |
| Down | 55 00 00 02 57 | |
| Right | 55 00 00 03 58 | |
| Confirm | 55 00 00 04 59 | |
| Return | 55 00 00 00 55 | |
| Volume Control | Toggle Mute | 55 00 1A 00 6F |
| Volume Up | 55 00 0C 00 61 | |
| Volume Down | 55 00 0E 00 63 | |
| Set Volume (0-100) | Volume: "0" | 55 00 0F 00 64 |
| Volume: "10" | 55 00 0F 0A 6E | |
| Volume: "20" | 55 00 0F 14 78 | |
| Volume: "30" | 55 00 0F 1E 82 | |
| Volume: "40" | 55 00 0F 28 8C | |
| Volume: "50" | 55 00 0F 32 96 | |
| Volume: "60" | 55 00 0F 3C A0 | |
| Volume: "70" | 55 00 0F 46 AA | |
| Volume: "80" | 55 00 0F 50 B4 | |
| Volume: "90" | 55 00 0F 63 C7 | |
| Volume: "100" | 55 00 0F 64 C8 | |
| Change Source | Source: Home | 55 00 91 00 E6 |
| Source: HDMI 1 | 55 00 80 08 DD | |
| Source: HDMI 2 | 55 00 80 09 DE | |
| Source: TYPE-C | 55 00 80 16 EB | |
| Set Backlight (0-100) | Backlight: "0" | 55 00 89 00 DE |
| Backlight: "10" | 55 00 89 0A E8 | |
| Backlight: "20" | 55 00 89 14 F2 | |
| Backlight: "30" | 55 00 89 1E FC | |
| Backlight: "40" | 55 00 89 28 06 | |
| Backlight: "50" | 55 00 89 32 10 | |
| Backlight: "60" | 55 00 89 3C 1A | |
| Backlight: "70" | 55 00 89 46 24 | |
| Backlight: "80" | 55 00 89 50 2E | |
| Backlight: "90" | 55 00 89 5A 38 | |
| Backlight: "100" | 55 00 89 64 42 | |